The protection relay is provided with connection sockets X13, X14 and
X15 only if the optional communication module with light sensor inputs
has been installed. If the arc flash detector option is selected when
ordering a protection relay, the light sensor inputs are included in the
communication module.
Table 54: Light sensor input connectors
Terminal Description
X13 Input Light sensor 1
X14 Input Light sensor 2
X15 Input Light sensor 3
5.1.5 RTD/mA inputs
It is possible to connect mA and RTD based measurement sensors to the protection relay
if the protection relay is provided with the optional RTD0001 module in standard
configuration D and with AIM0003 module in standard configurations F and N.
Table 55: Optional RTD/mA inputs with RTD0001 module
Terminal
Description
X130:1 mA1 (AI1), +
X130:2 mA1 (AI1), -
X130:3 mA2 (AI2), +
X130:4 mA2 (AI2), -
X130:5 RTD1 (AI3), +
X130:6 RTD1 (AI3), -
X130:7 RTD2 (AI4), +
X130:8 RTD2 (AI4), -
X130:9 RTD3 (AI5), +
X130:10 RTD3 (AI5), -
X130:11 Common
1)
X130:12 Common
2)
X130:13 RTD4 (AI6), +
X130:14 RTD4 (AI6), -
X130:15 RTD5 (AI7), +
Table continues on next page
Section 5 1MAC109016-MB C
Protection relay's physical connections
206 REF615 ANSI
Application Manual
To Next Page
Loading...
