Function IEC 61850 IEC 60617 ANSI/C37.2-2008
Residual current measurement RESCMMXU1 Io (1) IG
Three-phase voltage measurement VMMXU1 3U (1) VA, VB, VC
VMMXU2 3U (2) VA, VB, VC (2)
Residual voltage measurement RESVMMXU1 Uo (1) VG
Sequence voltage measurement VSMSQI1 U1, U2, U0 (1) V1, V2, V0
VSMSQI2 U1, U2, U0(B) V1, V2, V0 (2)
Single-phase power and energy
measurement
SPEMMXU1 SP, SE SP, SE-1
Three-phase power and energy
measurement
PEMMXU1 P, E (1) P, E-1
RTD/mA measurement XRGGIO130 X130 (RTD) (1) X130 (RTD) (1)
Frequency measurement FMMXU1 f (1) f
IEC 61850-9-2 LE sampled value sending SMVSENDER SMVSENDER SMVSENDER
IEC 61850-9-2 LE sampled value receiving
(voltage sharing)
SMVRECEIVER SMVRECEIVER SMVRECEIVER
Other
Minimum pulse timer TPGAPC1 TP (1) 62TP-1
TPGAPC2 TP (2) 62TP-2
TPGAPC3 TP (3) 62TP-3
TPGAPC4 TP (4) 62TP-4
Minimum pulse timer (second resolution) TPSGAPC1 TPS (1) 62TPS-1
Minimum pulse timer (minute resolution) TPMGAPC1 TPM (1) 62TPM-1
Pulse timer PTGAPC1 PT (1) 62PT-1
PTGAPC2 PT (2) 62PT-2
Time delay off TOFGAPC1 TOF (1) 62TOF-1
TOFGAPC2 TOF (2) 62TOF-2
TOFGAPC3 TOF (3) 62TOF-3
TOFGAPC4 TOF (4) 62TOF-4
Time delay on TONGAPC1 TON (1) 62TON-1
TONGAPC2 TON (2) 62TON-2
TONGAPC3 TON (3) 62TON-3
TONGAPC4 TON (4) 62TON-4
Set-reset SRGAPC1 SR (1) SR-1
SRGAPC2 SR (2) SR-2
SRGAPC3 SR (3) SR-3
SRGAPC4 SR (4) SR-4
Table continues on next page
1MAC109016-MB C Section 1
Introduction
REF615 ANSI 13
Application Manual
To Next Page
Loading...
