Software options #3 Notes and Rules
only for B40 and M17
only for A10 and A40
Circuit breaker condition monitoring - 6 CB M
15
Circuit breaker condition monitoring - 18 CB M
16
Circuit breaker condition monitoring - 9 CB M
17
IEC 62439-3 parallel redundancy protocol P
03
Selection for position #3
First local HMI user dialogue language #4 Notes and Rules
HMI language, English IEC B1
Additional local HMI user dialogue language
No additional HMI language X0
HMI language, English US A12
Selection for position #4.
Casing #5 Notes and Rules
1/2 x 19" case A Note: Only for A10/A25/A30
3/4 x 19" case 2 TRM slots C Note: Not for A10
1/1 x 19" case 2 TRM slots E Note: Not for A10
Selection for position #5.
Mounting details with IP40 of protection from the front #6 Notes and Rules
No mounting kit included X
19" rack mounting kit for 1/2 x 19" case of 2xRHGS6 or RHGS12 A Note: Only for A10/A25/A30
19" rack mounting kit for 3/4 x 19" case or 3xRGHS6 B
19" rack mounting kit for 1/1 x 19" case C
Wall mounting kit D Note: Wall mounting not
recommended with
communication modules with fibre
connection (SLM, OEM, LDCM)
Flush mounting kit E
Flush mounting kit + IP54 mounting seal F
Selection for position #6.
Connection type for Power supply, Input/output and Communication modules #7 Notes and Rules
Compression terminals K
Auxiliary power supply
24-60 VDC A
90-250 VDC B
Selection for position #7.
Human machine hardware interface #8 Notes and Rules
Medium size - graphic display, IEC keypad symbols B
Medium size - graphic display, ANSI keypad symbols C
Selection for position #8.
Transformer protection RET670 2.0
1MRK 504 141-BEN C
Product version: 2.0
ABB 117
To Next Page
Loading...
Need help?
General
