94 System Manual SCK Gas Sampling System 42/23-81 EN Rev. 4
Conditions Description in the
"Engineering Guideline" in ...
OK
Wall tube and mounting flange
manufactured and installed.
Creating the wall tube with mount-
ing flange
Installing the wall tube
The power and compressed-air
supply conforms to the require-
ments of the gas sampling sys-
tem.
Power and compressed-air supply
requirements
Air cannon, if present, is inte-
grated into the gas sampling
system control system only.
Integrating the air cannon into the
control system
The danger area around the
probe retractor is protected by a
protective installation.
Creating the base area for the
retractor
Creating the protective installation
around the retractor
To Next Page
