ABB SCK - System Identification

12 System Manual SCK Gas Sampling System 42/23-81 EN Rev. 4
System identification
The gas sampling system can be unambiguously identified by means of the speci-
fications on the nameplate. The nameplate is located on the left side wall of the
control cabinet. The nameplate is laid out as follows:
The individual areas of the nameplate have the following meaning:
No. Meaning
1
Product name
2
Product number
3
Customer order number
4
Production number
5
Manufacturer's address
6
Serial number of the retractor
7
Serial number of the cooling module
8
Year of manufacture of the system
9
CE mark
10
Environment-Friendly Use Period (EFUP) mark
11
Warning triangle to DIN EN 61010: observe operating instructions
12
Electric connections
Nameplate