Parameter
Number
Parameter Description, Explanations Options Adjustable
via
Limit the Number of Starts
Num Starts Allowed
time window.
Zero switchs off the start limit
function.
Num Starts Window
number of starts are allowed.
Num Starts Pause After the motor was stopped a new start is not
possible before the pause time is over.. This
paramter can be used independantly of the other
parameters i.e. without limiting the number of
starts in a time window.
Num Starts Overrun Reaction if no start is left anymore but a start
command was issued.
Num Starts Prewarn Reaction if only one start is left.
Maintenance related parameters
Motor operating hours level After the defined number of weeks of motor
operation a warning is triggered.
supervision
All
Motor stand still level After the defined number of weeks of continous
motor stand-still time a warning is triggered.
Motor Management Parameters Continued
126
To Next Page
Loading...
