Figure 11.1: Parameters Page on Flame Explorer
Sensor Type
The sensor type can be:
– IR Infrared
– UV Ultraviolet (HW Log, installed up to HW version “E1”)
– nUV Ultraviolet (SW Log, installed from HW version “F0”)
– UVIR Dual sensor (UV HW Log + IR HW Log, installed up to HW version “E1”)
– nUVIR Dual sensor (UV SW Log + IR HW Log, installed from HW version “F0”)
– IRT Pyrometer single sensor (installed from HW version “F0”)
8VZZ005286 B 82
11 Configuration Parameters in Flame Explorer
To Next Page