18
Zenith ZBTS T-series 100-1200A, INSTALLATION AND OPERATING INSTRUCTION
1
1 Operation instruction
2 HMI unit on the door, Level 4 (touch)
for configuration and automatic
operation, operation of the Bypass
switch
3 Lifting eyes
4 HMI unit on the door, Level 4 (touch)
for configuration and automatic
operation, operation of ATS switch
5 Place for racking in/out tool
6 Racking in/out mechanism
7 Release of the door locking, for
authorized persons only
8 Place for racking in/out mechanism,
in case the Bypass switch is also
draw-out version
9 Situation of programming port in
both HMIs (Bypass and ATS switches),
only for Ekip Programming-module
—
Fig. 2.3 Bypass-Isolation Automatic Transfer
Switch overview (Bypass: fixed version)
9
—
Fig. 2.5 The HMI units on the door
3 2 1
7 6 5 4
—
Fig. 2.4 Racking in/out mechanism
6
5
8
To Next Page
Loading...
