29
34ZBTS_30-1200A rev.A / 1SCC303043M0201
1
Alarm List To Define the Home Page
On the lower edge of the screen you can
see the Alarms, see Fig. 3.4. Touching the
alarm name in bottom bar will open alarm
list. It lists all active informations, warn-
ings and alarms.
To Confirm the Change
While viewing a specific page, it can be
defined as the home page by pressing the
home button for 3 seconds. All pages, ex-
cept for the menus, can be set as home
page. Home page is automatically shown
after inactivity.
—
Fig. 3.5 By touching on the alarm indication on the
lower edge of the screen you will get the Alarm List
—
Fig. 3.6 Home page definition, acceptance of the function
S1 Connected to Load
Load Current
393 A
11:06
60s
G
TruONE ATS
Switch Overview
S1 p Ok Not Ok S2
S1 Connected to Load
Load Current
393 A
Select as HOME Page?
Yes
No
Alarm List
Switch not in AUTO mode
Invalid Date
Programming
Application 2 Transformers/S1 Priority
Confirm Abort Modify
—
Fig. 3.7 After you have changed the parameter,
go back in the menu by pressing the " < " on the
top left corner or Home key and when prompted
confirm changes by "Confirm" option
To Next Page
Loading...
