Step
Action
5
Use your lancing device to obtain a blood drop
and apply blood to the white area at the end of
the test strip.
If sounds are turned on, the Reader beeps once
to let you know you have applied enough blood.
Note: See test strip instructions for use for
re-application instructions.
You will see a buttery on the screen while you
wait for your result. If sounds are turned on, the
Reader beeps once when your result is ready.
6
After reviewing your result, remove and discard the used test
strip according to test strip instructions for use.
Ketone Test
Apply Blood
IMPORTANT: After performing a blood ketone test,
wash your hands with soap and water and thoroughly
dry them.
Your Blood Ketone Results
Blood ketone results are marked on the results
screen and in the Logbook with the word Ketone.
Notes:
• Blood ketone is expected to be lower than 0.6 mmol/L.
• Blood ketone may be higher when you are sick, fasting, have
exercised hard, or if glucose levels are not controlled.
• If your blood ketone result remains high or becomes higher than
1.5 mmol/L, contact your health care professional immediately.
10:23pm
0.4
mmol
L
Ketone Test
61 62
ART43974_rev-A_manual.indd 61-62ART43974_rev-A_manual.indd 61-62 2/17/21 8:32 AM2/17/21 8:32 AM
To Next Page
Loading...
