Changing the Reader Settings
You can go to the Settings menu to change many settings on the Reader,
like alarm settings, sound & vibration, time & date, and report settings.
The Settings menu is also where you go to do a control solution test or to
check the System status.
Step
Action
1
To get to the Settings menu, touch the Settings
symbol
on the Home Screen.
Ends in 14 days
Check
Glucose
Review
History
10:23pm
Alarms
Sound & Vibration
Time & Date
Settings
1 / 4
Charging the Reader
A fully charged Reader battery should last up to 4 days. Your battery
life may vary depending on your usage. A Low Battery message
accompanies your result when you have enough charge remaining for
about one day of use.
Plug the included USB cable into an electrical
outlet using the included power adapter. Then,
plug the other end of the USB cable into the USB
port on the Reader.
Notes:
• You must charge the Reader when the battery
is low
to keep using the Reader.
• To fully charge the battery, charge the Reader
for at least 3 hours.
• Only use the USB cable and power adapter
included with the system.
• Fully charge your Reader before storing it for
more than 3 months.
OK
Please charge the Reader to
continue using it.
Low Battery
Charging
CAUTION: Be sure to select a location for
charging that allows the power adapter to be
easily unplugged.
75 76
ART43974_rev-A_manual.indd 75-76ART43974_rev-A_manual.indd 75-76 2/17/21 8:32 AM2/17/21 8:32 AM
To Next Page
Loading...
