Step
Action
2
(cont.)
• View Event Logs: A list of events recorded by the
Reader, which may be used by Customer Service to help
troubleshoot your System
• Perform a Reader Test: The Reader Test will perform
internal diagnostics and allow you to check that the
display is showing all pixels, sounds and vibrations
are working, and the Touchscreen is responding when
touched
Report Settings – Work with your health care professional to
set your Target Glucose Range, which is displayed on glucose
graphs on the Reader and used to calculate your Time In Target.
Your Target Glucose Range is not related to your alarm settings
Calculator Settings – Review the currently programmed
settings (option only available if your health care professional
has activated your insulin calculator)
Reader Basics – Review the information screens shown during
the Reader setup
Professional Options – Set by health care professionals only
Step
Action
2
Touch the setting you want to change:
Alarms – See Alarms section for information on setting alarms
Sound & Vibration – Set Reader sound and vibration. These
also apply to alarms
Time & Date – Change the Time or Date
Reminders – See Using Reminders section for information on
setting reminders
Control Solution Test – Perform a control solution test
Language – Change the language on the Reader (option only
available on Readers with multiple languages)
System Status – Check Reader information and performance
• View System Information: The Reader will display
information about your System including:
- Current Sensor end date and time
- Reader serial number and version number
- Serial numbers and status codes of most recent Sensors
(up to three)
- Sensor version for most recent Sensor
- Number of Sensors that have been used with Reader
- Number of tests that have been performed using test
strips
77 78
ART43974_rev-A_manual.indd 77-78ART43974_rev-A_manual.indd 77-78 2/17/21 8:32 AM2/17/21 8:32 AM
To Next Page
Loading...
