Description of the individual apps of the eMShome – Wallbox app |
33
Settings > Available charging devices
The Available charging devices card displays all the configured charging devices in a table. It is also possible to
add a new charging device here.
The configured charging devices, their configuration and their status are displayed in the table overview. Use the ar-
row icons in the header to sort the table by Label, Type or Address.
Label The configured name of the charging device is displayed here.
Type The type (ABL charging device) is displayed here.
Address The configured Wallbox ID of the charging device is displayed here.
Status
The current status of the charging device is displayed here by means of the
following states:
The OK (tick) symbol indicates that communication with the charging
device is working properly.
The Error (!) symbol indicates that communication with the charging
device is interrupted.
Info (i)
Clicking on the info symbol opens a window in which additional information
such as the serial number, model and firmware version of the charging device
is retrieved and displayed.
While the information is being retrieved from the charging device, a charg-
ing indicator appears.
If the charging device cannot be reached, the following message appears:
An error occurred while establishing a connection to the charging
device.
Click OK to close the window again.
Edit (pencil icon)
The Edit icon can be used to change the configuration of a connected charging
device.
Delete (bin icon) The Bin icon can be used to remove a charging device.
To Next Page
Loading...
Need help?
General