To Next PageTo Next Page
Need help?Do you have a question about the Accsence VersaLog and is the answer not in the manual?
States the manual's purpose and limitations on liability for errors or damages.
Details warranty coverage, repair, and replacement policies for product defects.
Explains procedures and conditions for returning defective and non-defective products.
Highlights logger capabilities, approvals, care, battery, and safety warnings.
Illustrates the physical layout and components of the VersaLog data logger.
Details input connections and specifications for voltage and current measurement channels.
Describes connections for thermocouple, thermistor, and RTD sensors for temperature measurement.
Explains connections for strain gauge and digital pulse/event inputs.
Explains how to configure and start the data logging process.
Describes the procedure for transferring logged data from the logger to a computer.
Details how to activate the logger for a new logging session in the field.
Lists the necessary computer hardware and operating system for VersaLog SiteView.
Provides step-by-step instructions for installing the VersaLog SiteView software.
Details general technical specifications like alarm functions, memory, and sampling intervals.
Provides data logging capacity based on sampling interval and enabled channels.
General| Measurement Parameters | Temperature, Humidity |
|---|---|
| Humidity Range | 0% to 100% RH |
| Communication Interface | USB |
| Protection Rating | IP65 |
| Resolution | 0.1°C for temperature, 0.1% for humidity |
| Battery Life | Up to 1 year (depending on logging rate) |
| Operating Conditions | 0% to 100% RH |
| Memory | 32, 000 data points (16, 000 temperature and 16, 000 humidity readings) |
