www.accuenergy.com
V: 1.0 Revised: Jan. 2018
Chapter 5: Viewing Real-Time Readings via Acuview Software
57
5.3.2 Reading Data Log on Meter’s Onboard Memory
From the left navigation panel click on the ‘Readings’ tab and then select ‘Data Log’
to retrieve the meter’s logged readings. The parameter settings for data log in meter’s
onboard memory refer to section 5.2.2 (Configure the Data Log using the meter’s onboard
memory).
On this window you can view the data log, while the maximum record number is 85995.
Fig 5-12 Reading Data Log on Meter’s Onboard Memory
To Next Page
Loading...
