Accuphase DP-77 User Manual

19
The contents of a program can be changed before play has started, or after setting the unit
to the stop condition by pressing the  
STOP
 button.
※ This cannot be carried out in the play mode or pause mode.
● To clear a track within a program
Press the 
STOP
button
Use the
CHECK
button to display the program number, which you want to delete. Then
press the
CLEAR
button to remove the track from the program.
● To clear the last track of a program
Press the
CLEAR
button.
With each push of the button, the last track of the program is deleted.
● To add a track to the end of a program
Use the track search buttons to display the number of the desired track, and
press the
PROGRAM
button to add the track.
With the remote commander, use the direct play buttons to specify the track number.
● To clear the entire program
Hold down the
CLEAR
button until the indication appears on
the display.
Changing the contents of a program
▼ The program contents are retained by the unit also after playback is finished. Pressing
the
PLAY
button will start the program again.
▼ The program contents are lost when you turn the power off or open the disc tray.
▼ Pressing the  
STOP
 button during program play terminates playback, but the pro-
gram contents are retained.
▼ During program play, you can use the  BACK track /   NEXT track buttons to
jump to earlier or later tracks in the program.
▼ The direct play buttons do not operate during program play.
▼ Repeat playback can be activated during program play, but A B repeat is not pos-
sible.
▼ The INDEX buttons can also be used during program play.
Additional information regarding program play
Pressing the button during program play
With each push of this button, the time display cycles as shown below.
TIME/
TEXT
Elapsedplayingtimeofcurrenttrack

Remainingplayingtimeofcurrenttrac
k

Remainingplayingtimeofprogram
Nameofcurrenttrack

(withTEXTdisc)
TIME
/
TEXT
MODEL RC-28
STOP
CLEAR
PROGRAM CHECK
MODEL RC-28
TRACK
TRAC
K

Accuphase DP-77 Specifications

Optical Specifications

SACD wavelength	650 nm
CD wavelength	780 nm
Optical output wavelength	660 nm

Digital Processor Specifications

Sampling frequencies	32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz
High sampling frequencies	176.4kHz, 192kHz
Dynamic range	114 dB

Power

AC voltage	120V/230V 50/60Hz
Power consumption	24 W
Net weight	17.7 kg

Weight and Dimensions

Width	475 mm
Height	151 mm
Depth	397 mm