Accuphase DP-77 - HS-Link Cable (1.5 M); Option Board Sampling Frequency Support Table; Useful Options

28
The DP-77 is an integrated SACD/CD player, but the transport and processor sections, although housed in one enclo-
sure, are entirely separate and can be used on their own, thanks to dedicated transport output and digital input
connectors. For further increased versatility, the DP-77 also provides option board slots conforming to the ADB 2
interface standard.
By installing boards in these slots as required, external digital components can be connected. Many different kinds of
option boards are available from Accuphase.
●
Any board can be installed in any empty slot.
●
For copyright reasons, the SACD digital signal does not appear at the output connectors of installed
option boards with digital inputs and outputs (such as the DIO-OC1) and cannot be recorded. The
SACD/CD signal output via HS-Link also cannot be digitally recorded.
●
Option boards designed for models such as the DC-330, DC-300, DP-85, DP-75V, DG-28/DG-38,
DF-35, etc. can be used.
Max.48kHz Max.96kHz
DI-BNC1
○ ○
○ ○
DIO-ST1
DIO-OC1
○ ○
DIO-PRO1
IN
OUT
×
○ ○
○
Option board sampling frequency support table
HPCCoaxialInputBoard
Digitalboardtype
HPCOpticalInput/OutputBoard
DigitalInput/OutputBoard
AES/EBUInput/Output
Board
DI2-HS1
DIO2-DG1
HS-LinkInputBoard
DO2-HS1
HS-LinkOutputBoard
WideRangeDigital
Input/OutputBoard
○：Supported
×：Notsupporte
d
Max.192kHz
Max.192kHz
2.8224MHz/1-bitDSDsignal
①HS-Linkcable(1.5m) HDL-15
This cable serves for transmission of the digital signal corresponding to the HS-Link
interface standard. It must be plugged into an HS-Link (RJ-45) connector.
●
Shielded twisted pair 8-conductor cable (TIA/EIA568-A CAT.5)
●
Also available in 3 m, 5 m, 7.5 m, and 10 m lengths.
6. Useful Options for the DP-77