Remote Station - Auxiliary
99
Operation
The Auxiliary Remote Station duplicates the front-panel display and keypad of the other installed
remote station or digital line guide.
At power-up, a software identification message is displayed for several seconds:
Remo t e S t a t i on
RMT 0 3
Rxx . xx
After a delay of several seconds, the Auxiliary Remote Station will then mirror the other remote
station or digital line guide’s display. Initially, this will be the other unit’s power-up software
identification message:
ccuBeam 3
DLG xx . x x
or
Remo t e S t a t i on
RMT 0 3 GP x x . x x
To Next Page
Loading...
