Fieldbus Interface
115
Appendix 1 / EtherNet/IP Interface
Product Specifications:
• Card size (H x W): 2.25” [57.15mm] x 2.25” [57.15mm]
• Power requirements: Supplied by EVO 150 controller
• Operating environment:
Maximum ambient temperature 120 deg F [48.9 deg C]
Humidity 0-90% non-condensing
EtherNet/IP is an industrial Ethernet network that combines standard Ethernet technologies with
the media-independent Common Industrial Protocol or "CIP." EtherNet/IP is one of the leading
industrial Ethernet networks in the world and is widely used in a variety of industries.
The IP address, subnet mask, default gateway, hostname, and BOOTP enable/disable option of
the EtherNet/IP card can be configured via the AccuWeb, Inc. IP Configuration Utility. Please
contact AccuWeb, Inc. for the latest copy of this software and module configuration information.
The module is set up with 5 Input words and 5 output words. You will not use word 0 of the Input
words at all. Word 0 out the Output words will need to be written as a 1 at all times.
The remaining Input and Output words follow the Output and Input Array format.
Mounting holes for stand-offs on
EVO 150 controller
RJ45 Jack
To Next Page
Loading...
