AccuWeb EVO 150 - EVO 150 Controller; EVO 150 TM Controller; Introduction

EVO 150 Controller
15
EVO 150
TM
Controller
Introduction
The EVO 150 controller’s main functions include polling the web sensors, end-of-travel sensors,
and control inputs, processing the input data, and sending the results to the servo-amplifier and
status outputs.
The controller’s main features include the following:
• Compatible with all ultrasonic and infrared PointSource and WideArray edge detectors, and
AccuBeam 3 digital line guide. These sensors are described on pages 54 and 60.
• Built-in web client.
• Enclosure mounted switch pad.
• Compatible with the PLC I/O board described on page 47.
• Compatible with the Serial I/O board described on page 51.
• Compatible with the Remote Stations described on pages 88 and 97.