Installation Drawings
121
Installation Drawings
Refer to these drawings to make installation easier:
1. Application drawing # AC-10302
This drawing shows the enclosure mounting hole pattern.
2. Application drawing #EC-10310
This drawing shows the control module mounting hole pattern.
3. Connection diagram #EC-10521
This drawing shows the field wiring of the system.
4. Connection diagram #EB-9042
This drawing shows the connections for the PLC I/O board.
5. Connection diagram # EB-8415
This drawing shows the connections for the Remote Station and Digital Line Guide to the
controller.
6. Application drawing # AB-8815
This application drawing shows the Remote Station mounting hole pattern.
7. Application drawing # AC-6844
This application drawing shows the Digital Line Guide mounting hole pattern.
8. Application drawing for various PDG web paths #C-7634
This drawing shows the different web path configurations that can be used with a positive
displacement guide (PDG).
9. Application drawing for Intermediate Guiding #AC-7635
This drawing shows how to install a positive displacement guide (PDG).
10. Application drawing for Intermediate Guiding #AC-7636
This drawing shows how to install a single roll steering roll (SRSR).
11. Application drawing for Intermediate Guiding #AC-7637
This drawing shows how to install a double roll steering roll (DRSR).
12. Application drawing for Winder/Rewind Guiding #AC-7638
This drawing shows how to install a shifting base for rewind guiding.
13. Application drawing for Unwind Guiding #AC-7639
This drawing shows how to install a shifting base for unwind guiding.
To Next Page
Loading...
