AccuWeb MICRO 4000 NET - Operation of Auxiliary Remote Station

Operation
The Auxiliary Remote Station duplicates the front-panel display and keypad of the other installed
remote station or digital line guide.
At power-up, a software identification messag
e is displayed for several seconds:
Remo t e St a t i on
RMT 0 3
A
Rxx . xx
After a delay of several seconds, the Auxiliary Re
mote Station will then mirror the other remote
station or digital line guide’s display. Initially, this will be the other unit’s power-up software
identification message:
A
ccuBeam 3
DLG xx . xx
or
Remo t e St a t i on
RMT 0 3 GPx x . x x
or
Remo t e St a t i on
RMT 0 3 WWx x . x x
Remote Station – Auxiliary
99
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com