Introduction
The MICRO 4000 NET Web Guide Control System is a microprocessor-based control system for
medium to large-sized web guides. It is compatible with AccuWeb’s dynamically compensated
ultrasonic and infrared edge detectors, digital line guide, remote stations, and all linear actuators.
A MICRO 4000 NET system can include up to seven main components:
1. Edge Detector or Line Guide Sensor
PointSource and WideArray Compensated Edge Detectors
Ultra
-compact housing
Available with sensing areas ranging from 0.2” to 18.6” wide [5mm to 472mm]
Available with gap widths ranging from 1.5” to 4” [38mm to 102mm]
Fully compensated for temperature, humidity, dust, and most other process contaminants
Immune to passline variation and web flutter
Suitable for long cable length applications
Intrinsically-safe models available for hazardous environments
Ultrasonic models are ideal for transparent or opaque film, paper, and foil web materials
Infrared (IR) models are ideal for non-wovens and other porous web materials
Hi-Temp Compensated Ultrasonic Edge Detector
Withstands oven temperatures up to 500 deg F [260 deg C]
Available with waveguide tube lengths up to 84” [213cm]
Fully compensated for temperature, humidity, dust, and most other process contaminants
Immune to passline variation and web flutter
Suitable for long cable length applications
Intrinsically-safe models available for hazardous environments
Ideal for transparent or opaque film, paper, and foil web materials
AccuBeam 3 Digital Line Guide Sensor
Ultra
-compact housing
Three light source colors and three illumination angles provide optimal lighting
Line and edge guiding modes
Pattern matching algorithm locks onto hard-to-see lines
Auto-calibration automatically selects optimum settings
Environmentally-sealed function switches and display
Suitable for long cable length applications
MICRO 4000
NET Web Guide Control System
4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...