2. MICRO 4000 NET
Controller Board
Single-boa
rd design
Auto-recovery after power interruption
Non-volatile memory for user-settable parameters and operating modes
On-board parameter entry keypad and display
Two edge detector inputs for centerline guiding
Serial I/O port for remote station and digital line guide
Analog ±10 VDC output for controlling motor drive
Actuator end-of-travel inputs:
Potentiometer input for electronically-adjustable limits
Limit switch inputs for fixed limits
Opto-isolated inhibit input
Opto-isolated fault indicator output
Auxiliary analog and digital I/O
Input voltage: 90-132 VAC or 180-264 VAC, 50/60 Hz, single-phase
3. MICRO 4000 NET PWM Motor Drive
Fast, accurate response to web movement
Drives brush or brushless DC motors up to 746 watts (1.0 HP)
4. MICRO 4000 NET
Enclosure
Low
profile
Environme
ntally-sealed function switches
Cam-locked door with double-bit insert key
External mounting feet
5. AccuWeb Linear Actuator
Available with brush or brushless DC motors up to 746 watts (1.0 HP).
Available with standard stroke lengths up to 6” [ 152mm] (other lengths available upon
request)
Available with limit switches or potentiometer for sensing end-of-travel limits and servo-
center position
MICRO 4000
NET Web Guide Control System
5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...