3-14 Machine Maintenance Procedures
WLAN (Wireless Local Area Network) Module Removal 0
Prerequisite:
Battery Pack Removal
1. Find the WLAN module (A) on the top assembly (Figure 3-10).
Figure 3-10. Component Location
2. Disconnect WLAN antennas (B) connected to the WLAN card (Figure 3-11).
3. Remove one (1) screw (C) securing the WLAN module in place (Figure 3-11).
Figure 3-11. WLAN Module Removal
A
D
C
WEEE Annex VII component : A. WLAN Card, B. WWAN Card
D. Touchpad
B
E