Machine Maintenance Procedures 3-55
Replacing the LCD Bezel 0
1. Place and align the LCD bezel with the LCD cover and press along the sides of the LCD
bezel to secure the latches to the LCD cover (Figure 3-71).
Figure 3-71. Replacing the LCD Bezel
2. Continue pressing downward along the top side and bottom side of the LCD bezel to
engage all the latches.
3. Press the two LCD hinge caps together to secure the latches to the LCD cover. Make
sure all the latches are fully engaged.
Use care not to damage all cables during LCD bezel installation.
To Next Page
Loading...
