3-24 Machine Maintenance Procedures
LTE Board Removal (For C732L & C732LT only) 0
Prerequisite:
LCD Module Removal and
WWAN (Wireless Wide Area Network) Module Removal (For C732L &
C732LT only)
1. Find the LTE board (E) on the top assembly. Refer to Figure 3-10.
2. Disconnect and remove the LTE board high-speed FPC (G) from the mainboard
connector (H) and LTE board connector (F) (Figure 3-25).
3. Disconnect and remove the LTE board low-speed FPC (J) from the mainboard
connector (K) and LTE board connector (I) (Figure 3-25).
4. Disconnect and remove the LTE board FPC (M) from the mainboard connector (N) and
LTE board connector (L) (Figure 3-25).
5. Remove one (1) screws (A) securing the LTE board in place (Figure 3-25).
Figure 3-25. LTE Board Removal
LTE board high-speed FPC (Flexible Printed Circuit), LTE board low-speed FPC,
and LTE board FPC can be damaged if removed while the mainboard
connector and LTE board connector are locked.