3-36 Machine Maintenance Procedures
LCD Panel Removal 0
Prerequisite:
LCD Bezel Removal
1. Find the LCD panel (C) on the LCD cover. Refer to Figure 3-37.
2. Remove four (4) screws (A) securing the LCD panel in place (Figure 3-42).
Figure 3-42. LCD Panel Removal
3. Carefully turn the LCD panel (C) over so that the display panel is face down on a flat
surface (Figure 3-43).
4. Remove the clear mylar tape (A) securing the eDP cable to the LCD panel
(Figure 3-43).
Figure 3-43. eDP Mylar Tape