Acer Chromebook C732 - Replacing the LTE Board (for C732 L & C732 LT Only)

3-60 Machine Maintenance Procedures
Replacing the LTE Board (For C732L & C732LT only) 0
1. Place the LTE board onto its compartment on the top assembly. Make sure that the
three apertures on the LTE board are aligned with the studs (A) located on the top
assembly (Figure 3-77).
Figure 3-77. Replacing the LTE Board
2. Install and secure one (1) screw (E) to the LTE board (Figure 3-78).
3. Connect the DBL end of the LTE board high-speed FPC (G) to the LTE board connector
(F) and connect the MBL end to the mainboard connector (H) (Figure 3-78).
4. Connect the DBL end of the LTE board low-speed FPC (J) to the LTE board connector
(I) and connect the MBL end to the mainboard connector (K) (Figure 3-78).
5. Connect the LTE end of the LTE board FPC (M) to the LTE board connector (L) and
connect the MB end to the mainboard connector (N) (Figure 3-78).
Figure 3-78. Replacing the LTE Board
A
G
H
E
J
K
F
I
M
L
N
DBL
DBL
LTE
MBL
MBL
MB