Acer Chromebook C732 - LCD Module Removal

3-16 Machine Maintenance Procedures
LCD Module Removal 0
Prerequisite:
Battery Pack Removal
1. Disconnect the WLAN antennas (A) connected to the WLAN card (Figure 3-13).
2. [For C732L & C732LT only] Disconnect the WWAN antennas (B) connected to the
WWAN card (Figure 3-13).
3. Remove the antenna cables from the hook (E) and cable guides (Figure 3-13).
4. Disconnect the eDP cable (C) from the mainboard connector (D), and remove the eDP
cable from the cable guides as shown in Figure 3-13.
Figure 3-13. WLAN Antenna & eDP Cable Location
5. Place the system on a flat surface and open the LCD module (G) to a 90 degree angle
as shown in Figure 3-14.
6. Remove four (4) screws (F) securing the LCD module (G) in place (Figure 3-14).
Figure 3-14. LCD Module Screw Location
A
C
D
B
E
G
F
F