3-18 Machine Maintenance Procedures
WWAN (Wireless Wide Area Network) Module Removal
(For C732L & C732LT only) 0
Prerequisite:
Battery Pack Removal
1. Find the WWAN module (B) on the top assembly. Refer to Figure 3-10.
2. Disconnect WWAN antennas (A) connected to the WWAN card (Figure 3-16).
3. Remove one (1) screw (C) securing the WWAN module in place (Figure 3-16).
Figure 3-16. WWAN Module Removal
4. Remove the WWAN module (B) from the LTE board connector (D) (Figure 3-17).
Figure 3-17. WWAN Module Removal