3-66 Machine Maintenance Procedures
Replacing the WWAN (Wireless Wide Area Network) Module
(For C732L & C732LT only) 0
1. Place and insert the WWAN module into the LTE board connector (A) (Figure 3-84).
Figure 3-84. Replacing the WWAN Module
2. Install and secure one (1) screw (C) to the WWAN module (Figure 3-85).
3. Connect the MAIN antenna (yellow-color) to the WWAN pin 1 (Figure 3-85).
4. Connect the AUX antenna (blue-color) to the WWAN pin 2 (Figure 3-85).
Figure 3-85. Replacing the WWAN Module