System Utilities 2-9
Switching to Developer Mode (DEV Mode) 0
1. Plug in the AC adapter then open the lid (LCD panel) to turn on the system.
DO NOT unplug the AC adapter.
2. Press the
Esc + Reload + Power
keys simultaneously and hold the three keys for more
than one second to enter Recovery Mode (Figure 2-11).
Figure 2-11. Esc + Reload + Power Keys
3. When a message appears notifying you to insert a recovery USB stick or SD card, press
Ctrl + D
to change to Developer Mode.
Figure 2-12. Recovery Mode
4. A message will appear asking you to confirm whether to turn OS verification OFF.
Press
Enter
to restart the system.
Figure 2-13. Reboot Screen