Acer P1200 - Un-lock SNID and Default Language Reset

P1100C/P1200i/P1200B
Condential
6-7
6-5 Un-lock SNID and Default Language Reset
- Hold on the "Power" button, then plug in power cord.
- The Power LED will ash red and blue for 2 seconds.
- When the Power LED ashes blue, loosen the "Power" button.
- After that, please check the LED status and judge the actions as the following table:
Note: If it is fail, please do the actions agian as above steps.
S/N General rule:
Use the last 1 digit code (as red word) for language information
Language Code (F) Default Language
1 English
2 Thailand
3 Japan
4 TC
5 SC
6 Russian
7 Germany
8 Hungarian
Power LED Status Result
Power (red) OK
Power (red and blue) Fail