Acer P1200 - Setup Procedure (VGA & HDMI)

P1100C/P1200i/P1200B
Condential
6-3
6-3 Setup Procedure
(VGA & HDMI)(VGA & HDMI)
1. Connect all ports
(1) Connect P1 of xture to COM Port of
PC/Laptop by RS232 Cable.
(2) Connect P2 of xture to VGA IN
Port of projector by VGA Cable.
(3) Connect P3 of xture to HDMI
Port of projector by DVI Cable and
HDMI(M) To DVI(F) Adapter.
(4) Plug Power Adapter to P4 of xture.
(5) Plug Power Cord to projector.
Note: - You must conrm that the JP3 is closed in
all procedure.
DVI Cable
HDMI Port
HDMI(M) To
DVI(F) Adapter
JP3
P2
RS232 Cable
Adapter
P4
P1
VGA Cable
VGA IN Port
Power Cable
P3
DVI Cable