Acer P1200 - Section 3: Waveform Download

P1100C/P1200i/P1200B
Condential 5-11
Section 3: Waveform Download
- Hold on the "Power" button, then plug in power cord.
- The Power LED ashes red and blue for 2 seconds.
- When the Power LED ashes blue only, loosen the
"Power" button.
- After that, the projector will automatically get into
standby status.
- After about 8 seconds, the Power LED lights red, and
waveform Download is completed.
Note: - This step must be executed after Lamp Driver
changed.