Acer P1200 - Assemble System Fan Module and the Blower Module

P1100C/P1200i/P1200B
Condential
2-24
6. Screw 1 screw (as green circle) to
assemble the Lamp Driver Module.
7. Plug 2 connectors (as red square) on
LVPS Module.
8. Fasten 1 tenon(as red circle) to
assemble the Interrupt Switch.
2-21 Assemble SystemSystem
Fan Module and thethe
Blower Module
1. Assemble the Blower Rubber and the
Blower.
2. Screw 3 screws (as yellow circle) to
assemble the Blower Module.