Acer P1200 - Get into FW Download Mode; USB Driver Upgrade Procedure

P1100C/P1200i/P1200B
Condential 5-4
5-1-3 Get into FW Download
Mode
1. Set up
- Hold on "Power" button and plug in the
power cord.
- After 5 seconds, the Power LED, Lamp
LED and Temp LED will light red, then
loosen "Power" button.
- Connect projector to PC by USB cable.
5-1-4 USB Driver Upgrade
Procedure
1. Execute Program
(1) Connect projector with PC by USB
cable.
(2) "Found New Hardware Wiszard" picture
will appear on the screen.
(3) Select "Install the software automatically
(Recommended)".
(4) Click "Next".
(5) Searching picture, please wait for
several seconds.
(3)
(4)
(2)