Acer P1200 - Chapter 2 Disassembly Process & Assembly Process

P1100C/P1200i/P1200B
Condential
iii
Table of Content
Chapter 1 Introduction
Highlight 1-1
Compatible Mode 1-4
Product Overview 1-8
Chapter 2 Disassembly Process & Assembly Process
Equipment Needed & Product Overview 2-1
Disassemble Lamp Module 2-2
Disassemble Top Cover Module 2-3
Disassemble Keypad Board Module and Zoom Ring Module 2-4
Disassemble Main Board Module and IO Board 2-5
Disassemble Front Cover Module 2-9
Disassemble Color Wheel Module 2-10
Disassemble Engine Module 2-11
Disassemble DMD Chip and DMD Board 2-11
Disassemble System Fan Module and the Blower Module 2-13
Disassemble Lamp Driver Module and Interrupt Switch and Speaker
2-15
Disassemble LVPS Module 2-16
Disassemble Bottom Shielding and IO Cover Module 2-17
Disassemble Elevator Foot Rubber 2-18
Rod Adjustment 2-19
Re-write System and Lamp Usage Hour 2-20
Assemble Elevator Foot Rubber 2-21
Assemble Bottom Shielding and IO Cover Module 2-21
Assemble LVPS Module 2-22
Assemble Lamp Driver Module and Interrupt Switch and Speaker
2-23