P1100C/P1200i/P1200B
Condential
2-16
2-12 Disassemble LVPS
Module
1. Unscrew 6 screws (as red circle) to
disassemble the LVPS Module.
2. Unplug 1 connector (as green square).
3. Remove the cable and the AC Inlet
Bracket from LVPS Module.
AC Inlet Bracket
NOTE: Circuit boards > 10 cm² has been
highlighted with the yellow rectangle
as above image shows. Please
detach the Circuit boards and follow
local regulations for disposal.
6. Unscrew 1 screw (as red circle).
7. Separate Speaker and Speaker Bracket.
To Next Page
Loading...
