Acer P1200 - Wireless Function Test

P1100C/P1200i/P1200B
Condential
4-18
4-14 Wireless Function Test (For P1200i)
1. Projector Setting
-T he setting procedure is same as 4-11-1.
2. PC Setting
(1). Right click the "Wireless Network Connection".
- Click "Properties".
(2). Select "Internet protocol (TCP/IP)".
- Click "Properties".
(3). Modify the IP address to 192.168.100.12
Modify Subnet mask to 255.255.255.0(as red square).
Note: The HOST ID (192.168.100.XXX) of PC
IP address must be different from the
projector IP address recorded down in 4-11-1.
- Click "OK".
(4) Click "OK".
(5) Right click the "Wireless Network Connection".
- Click "View Available Wireless Networks".