Acer P1200 - Disassemble Lamp Driver Module and Interrupt Switch and Speaker

P1100C/P1200i/P1200B
Condential
2-15
3. Unplug 2 connectors (as red square).
4. Unscrew 2 screws (as blue circle) and
Unfasten 2 tenons (as yellow square)
5. Separate Lamp Driver and Lamp
Driver Holder.
NOTE: Circuit boards > 10 cm² has been highlighted with the yellow rectangle as
above image shows. Please detach the Circuit boards and follow local
regulations for disposal.
2-11 Disassemble Lamp
Driver Module and
Interrupt Switch and
Speaker
1. Take the Interrupt Switch off and Unplug
2 connectors (as red square).
note: Loosen the hook on the Lamp Driver.
(as red circle)
2. Unscrew 1 screw (as green circle) to
disassemble the Lamp Driver Module.