Acer P1200 - Network Function Test

P1100C/P1200i/P1200B
Condential
4-14
4-13 Network Function Test (For
P1200i/P1200B)
1. Projector SettingProjector Setting
(1) Power on projector.
(2) Press “Menu” to get into OSD Mode.
(3) Select “Setting ->LAN”, choose “On”
(4) Record projector IP address through LAN IP/
Mask (Record IP address: 192.168.100.10).
(5) Connect projector with PC by LAN cable.
2. (1)
2. PC Setting
(1). Double click the "Local area connection".
- Click "Properties".
(2). Select "Internet protocol (TCP/IP)".
- Click "Properties".
2. (2)