Acer P1200 - Page 35

P1100C/P1200i/P1200B
Condential
2-12
NOTE: Circuit boards > 10 cm² has been highlighted with the yellow rectangle as
above image shows. Please detach the Circuit boards and follow local
regulations for disposal.
5. Rotate the screw (as yellow circle)
180° counterclockwise to disassemble
the DMD Board and DMD Chip.
Note: - Avoid touching the DMD Chip when you
disassemble it.
- Pay attention to the xed position when
assembling the DMD Chip.
3. Unscrew 2 screws (as blue circle).
4. Disassemble the Heat Sink and DMD
Module.