4
Always disconnect power to the printer and
unplug before performing any service or mainte-
nance.
Do not operate without proper electrical ground.
To prevent the risk of severe or fatal electrical
shock, special precautions must be taken. Equipment should be
plugged into an approved Ground Fault Circuit Interrupt (GFCI)
receptacle.
Do not operate equipment if the power cord and/or plug are dam-
aged, or if any other damage to the unit is visible or suspected.
Other
Do not alter the construction or design. Do not remove safety
devices, i.e. the acrylic hood.
Do not use equipment for other than its intended purpose, as
described in this user manual.
This printer is intended for indoor use only.
To Next Page
Loading...
