Ackuretta SOL - Maintaining Your Printer; 6.1 Using the Clean Vat Function

43
Maintaining your printer
6.1 Using the Clean Vat function
When a print fails, you can use the Clean Vat function to remove
pieces of print that did not securely attach to the build platform
during the print process.
The Clean Vat function cures a layer of resin at the bottom of the
vat. You can then easily remove the cured layer and dispose of it
with any other debris.
You will need the following items:
• Some stiff paper or cards;
• A bin and clear plastic bag; and
Note: We strongly
recommend that
you wear a respira-
tor if you are work-
ing with 3D
printing materials
for extended peri-
ods of time.
• Personal protective equipment (PPE), i.e. chemical resistant
gloves.