22
Step 6 Press Add to Queue to add the selected file to the
print queue.
Step 7 Select the Queue tab and select the file you just
added.
Step 8 Review and confirm your print details (i.e. the file
name, the resin profile, the volume of resin, and the
number of layers).
Step 9 Press print to start the print process. The build plat-
form moves down and toward the vat and the print
process begins.
More info: You can remove the USB device when
the build platform moves down and the print pro-
cess starts.
4.1.2 Printing via the web console
If you have connected your printer to a local network, you can add,
edit, and view a print job in an Internet browser on a PC or mobile
device on the same network.
For more information about how to set up your printer so that you
can access the web console, please refer to the appropriate sec-
tion:
• “Connecting to a wired network” on page 16
• “Connecting to a wireless network” on page 17
To Next Page
Loading...
