3
1.4 Safety instructions
Please note that this printer is to be used by trained personnel
only. You must read this manual and all notices, warnings and
safety instructions received with your printer before operating the
printer to ensure your safety.
To guard against injury, basic safety precautions should be
observed, including the following:
Personal Protective Equipment (PPE)
You must use personal protective equipment
(PPE) during the operation of this printer and
when handling 3D printing materials.
Ultraviolet Radiation
Avoid exposure to direct or reflected ultraviolet
rays. Ultraviolet rays are harmful to the eyes and
skin.
Ultraviolet light may break down plastic, rubber,
or other non-metallic materials, can fade colors,
and can be damaging to plant life. Shield all plas-
tic, rubber, or other non-metallic parts, plant life, etc. which may be
exposed to direct or reflected ultraviolet rays.
Electrical Shock Hazard
To Next Page
Loading...
