Ackuretta SOL - 2.3 Connecting to a Network; 2.4 User Interface

8
• Polishing kit – Polishing the surface of your print to produce the
desired finish.
Make sure you have a safe and legal place and method for remov-
ing unused resin.
2.3 Connecting your printer to a network
Connect your printer to a network so that you can get access to
the web console and start the print process from an Internet
browser.
There are two options for connecting your printer to your network:
• A wired connection (i.e. LAN/Ethernet); and
• a wireless connection (i.e. Wi-Fi).
Please refer to “Connecting to a network” on page 16 for more
information.
2.4 User interface
When you turn on your printer, the machine takes a moment to
load and then shows the Home screen. The Home screen shows
icons that indicate Wi-Fi signal strength (if you are connected to a
wireless network), the printer IP address, and whether there are
any notifications.