5
Getting Started
2.1 Unboxing your printer
Step 1 Open the printer box. The top of your printer is visi-
ble with handles on both sides. There are three
smaller accessory boxes packed behind the printer.
Step 2 Remove the accessory boxes from the main box.
Step 3 Remove the contents of the four accessory boxes
and put them in a safe place.
Step 4 Lift the printer out of the box by the handles.
Step 5 Put the printer on the floor adjacent to the box.
Step 6 Move the handles away from the printer.
Step 7 Lift the printer out of the internal packaging and put
it on a table.
Tip: When mov-
ing the printer,
always hold the
bottom of the
printer.
• Keep the printer in a vertical position and avoid
tilting it backwards to avoid bending or displac-
ing critical components.
Step 8 Remove the plastic wrap and the Quick Start Guide.
Step 9 Raise the hood and make sure the Vat and Build Plat-
form are in place.
To Next Page
Loading...
